Glacier bay 67536-0508D2 Guía De Uso Y Mantenimiento página 16

Troubleshooting (continued)
3
The sensor is not activating
the water flow
□
When you turn the handle to the full on position,
the water will turn on.
□
However, when you move your hand in front
of the sensor, the water does not turn off as
it should.
□
This indicates the sensor window may need to
be cleaned. If the sensor window is clean, and
still not functioning, this means the control box
will need to be replaced. Call Glacier Bay
customer service to request a replacement
control box. Replace the old control box with the
new control box.
L
4
There is a low flow of water or
LED indicator in the spray head
is not functioning
□
This could indicate that the washer in the "in" end of
the control box is dirty or damaged. Remove the
hose and unscrew the connector. Take out the
washer from the control box. Clear the washer
or replace the washer. Reassemble the connector
and hose.
Hose
16
Connector
Washer
Control
box