Eschenbach visolux Manual De Instrucciones página 36

Switching split screen function on/off
Select this symbol and then press the
screen function on or off. This allows you to determine whether
the built-in display is also shown if an HDMI device is connected.
If the function is switched on, the
function is switched off the
If you switch this function on the refresh rate on both devices
is reduced to 30 images per second. For this reason you should
only activate the split screen if the additional display is absolute-
ly necessary for orientation over the reading material.
Setting the reading speed
Select this symbol and then press the
ing speed for the DLS function (Dynamic Line Scolling) using the
following symbols, in other words the advance speed with which
the live image runs over the display when scrolling:
- low reading speed
- medium reading speed
- high reading speed
If you select these symbols using the scrolling buttons (q, i) the
reading speed associated with the relevant symbol is shown as
an example in the background.
Once you have selected the required value the device will return
to displaying the first menu level. If you wish to return to the first
stage of the setting menus without making changes, select the
symbol and then press the
Select the
the second level of the settings menu:
symbol and then press the
button to turn the split
symbol is displayed, if the
symbol is displayed.
button to set the read-
button.
- 33 -
button to call up