Step 3: Installing The Bi-Admin Management Utility - Linksys EtherFast Serie Guía De Instalación Rápida

I. The Add Printer Wizard
screen will come up at this
point. Follow the standard
procedure for adding print-
ers under Windows. If you
have any questions on
adding printers, please refer
to your printer's documenta-
tion.
J. After your printer(s) have
been added, you will return
to the Configure Printer
Port screen. Click Connect
to connect the printer(s).
K. The Printer Port Setup
screen will appear again,
displaying the printers that
are now communicating
with the PrintServer. Click
Next to add more printers,
or Close to complete the
installation/conf iguration
procedure.
You have successfully installed the PrintServer's Drivers.
Proceed to Step 3 for installing the PrintServer
with the Bi-Admin Management Utility.
8
Instant EtherFast
I
J
K
EtherFast ® 10/100 PrintServers
® Series
Step 3: Installing the Bi-Admin
Management Utility
A. Insert the PrintServer CD into your CD-ROM drive. Click Start and select
Run. Type D:\utility\biadmin\setup.exe (where "D" is the letter of your
CD-ROM drive) in the Open field that appears. Click OK.
B. When the setup program's
Welcome screen appears,
click Next.
C. Enter the directory name
where you want the Bi-
Admin
installed. We recommend
that you use the default direc-
tory: C:\Linksys\printserver.
Then, click Next.
A
B
program to be
C
9