FALL SAFE S-LINE VERTIX SYSTEM Manual De Instalación página 3

Presentation / Description
This FALL SAFE® "S-Line Vertix", is a Personal Protective Device (PPE) against fall from
heights. It is compliant with de Regulation (EU) 2016/425 – EN 353-1:2014+A1:2017 – Guided
Type Fall arresters including a rigid anchor line.
The FALL SAFE® "S-Line Vertix", guided type fall arrester including a rigid anchor line is
permanently installed on a ladder or other structure to allow access for people who will be
protected against the risk of falling.
It allows the vertical movement of a user connected to the cable fully upwards.
The FALL SAFE® "S-Line Vertix", guided type fall arrester including a rigid anchor line consists
of a vertical stainless steel cable attached to the structure by an upper anchor, a lower anchor
and, if necessary, one or more intermediate anchors.
Features:

Only one user allowed for a maximum of 120kg and a minimum of 50kg

Distance between steel rope guard at a maximum distance of 8 m one from the other
and/or from the anchor points;

The cable must be tensioned with a value of 1 kN (maximum);

FALL SAFE® "S-Line Vertix lifeline can have an inclination of maximum 9,5°;

Use only with S-Line Grab Kit FS680
The rigid anchor device has been tested and certified by accredited ISO 17025 laboratory
QUINTIN CERTIFICATIONS:
NOTIFIED BODY CE 2754
LISTED ORGANIZATION FOR CE TYPE APROVAL
ALIENOR CERTIFICATION, 21 Rue ALBERT EINSTEIN
ZA du Sanital – 86100 Chatellerault – France
LISTED ORGANIZATION FOR: (EU) 2016/425│ISO9001:2015
SGD FIMOKO OY, P.O. Box 30 (Särkiniementie 3) 00211 Helsinki – Finland
NOTIFIED BODY: CE 0598
QUINTIN CERTIFICATIONS
1031 route de Saint Ange
38640 Varces Allières et Risset
France
INSTALLATION MANUAL
FALL SAFE® 2