Running In; Aftercare; Accessories - Q Acoustics Concept Serie Manual Del Propietário

Running In

In common with many types of complex mechanical systems the Concept
300 loudspeaker will not deliver its optimum performance until it has been
in use for a certain initial running-in period. The correct performance of
a loudspeaker depends in part on the compliance of the suspension
materials used during manufacture and these will only attain their long term
steady state once they are operating at the temperature and modulus of
elasticity specified during the design phase. It can take several days for a
speaker which has been stored in a cold warehouse to finally reach room
temperature and so we recommend at least 24 hours of normal use for
the drive units to loosen up sufficiently for them to perform as the designer
intended.

Accessories

Q Concept 300 stand pair
(W x H x D) 492 x 688 x 430mm

Aftercare

Cabinet Care
Clean cabinets only with a lightly dampened cloth. Do not use
solvent based cleaning materials. Never use abrasives of any
kind.
The cabinet surfaces will usually only require light dusting. Should an
aerosol or other cleaner be used, apply the cleaner onto the cloth first
and not directly onto the product. Test a small area first, as some cleaning
products may damage the finish. Avoid products that are abrasive, or
contain acid or alkaline agents. Do not use any cleaning materials on the
drive units and avoid touching them as damage may result.
Real wood veneers are treated with an ultra-violet resistant
lacquer to minimise changes in colour over time. Nevertheless,
like all natural materials, a degree of colour change is to be
expected. Keep the speakers away from direct sources of heat
such as radiators and warm air vents in order to minimise the
possibility of the wood veneer cracking. Keep the speakers
away from direct bright sunlight.
Grilles
Grilles should only be cleaned using a soft brush when necessary.
If using the Concept 300 with the grilles removed, remember to replace
them if pets or children are present.
Drive Units
Do not touch the drive units as they are easily damaged when exposed.
10