heat4all ICONIC Manual De Servicio página 9

device is placed or mounted in its normal position of use.
Children of 3+ years but younger than 8 years may not insert the power plug into the
socket, control the device, clean the device and/or carry out maintenance tasks.
Children younger than 3 years are to be kept away unless they are under permanent
supervision.
ATTENTION: Danger of overheating and fire hazard!
Do not place any objects on the IRH and
do not cover the heating element!
Do not touch the IRH when in use. Doing so may cause severe burns as the IRH's
surface may reach temperatures of up to 120° C (248° F).
Heat4All IRH may not be used when the power cable or power socket are damaged.
Their prestine condition must be confirmed before operating the IRH. Do not pull
on the cable; this might damage the plug. Do not pinch or bend the cable. Should
the power supply of the panel get damaged in any way, it has to be replaced by the
manufacturer, his customer service or a similarly qualified person.
Heat4All IRH may not be exposed to high humidity or excessive moisture. The heating
element may not be mounted in the immediate proximity of tubs, showers or pools. It
may further never be used by people in tubs, pools or showers.
Our Glass Picture and Decor Glass Pictue Panels are produced using high-quality ESG
glass (single-panel safety glass). ESG glass is mechanically sturdier, which, in the case
of breaking, will break into less sharp-edged shards. Attention: Avoid mechanically
straining the glass.
In the case of damage to the glass, immediately disconnect the panel from power and
do not plug it in again. The IRH needs to be immediately dismounted as parts might fall
off and cause injuries or further damage.
Heat4All IRH do not come with integrated temperature control devices. The IRH may
therefore not be used in small rooms whose tennants cannot leave them on their own,
unless they are under constant supervision.
Should you not use the panel for longer periods of time, we recommend unplugging it.
Make sure to closely follow the Mounting Manual.
GENERAL MOUNTING GUIDELINES
Heat4All IRH may only be mounted using the original mounting kit. Please make sure
that the included wall plugs and screws can be used in your wall or ceiling. We will not
be liable for any damages resulting from the mounting of our panels. Any such dama-
ges do not fall under our warranty. Further, we will not be liable for any consequential
damages.
The heating elements may only be used with the original frames as otherwise our
warranty will be void and we will not be liable for any consequential damages.
We recommend hiring professional personel for mounting the panels.
The installation via a set power supply may be exclusively done by a concessionary
professional.
The mounting of the Heat4All® IRH on the wall or ceiling needs to be done by using