Replacing Belt - Panasonic MC-GG233 Instrucciones De Operación

Replacing Belt

Motor Shaft
Arbre
d'entraînement
du moteur
Eje del motor
Belt
Courroie
Correa
Belt
Motor Shaft
Courroie
Arbre
Correa
d'entraînement
du moteur
Eje del motor
Nozzle
Tête
d'aspiration
Boquilla
Agitator
Agitateur
Agitador
Agitator
Agitateur
Agitador
Agitator
Agitateur
Agitador
End Cap
Bouchon
Tapa del
extremo
Groove
Ouverture
Ranura
➢ Replace belt whenever a burning
rubber smell caused by excessive
slippage occurs.
➢ Remove lower plate.
➢ Remove agitator by carefully lifting
out.
➢ Remove worn or broken belt.
➢ Loop new belt (Panasonic Type UB8
only) around motor shaft and belt
pulley; see illustration for correct
belt routing.
➢ Reinstall agitator back into nozzle
housing grooves.
➢ After reinstalling the agitator, turn it
by hand to make sure that belt is
not twisted or pinched and that all
rotating parts turn freely.
➢ Reinstall lower plate.
- 30 -