EdilKamin TALLY- FIORD Manual Del Usuario página 7

DISMANTLING THE REFRACTORY ELEMENTS FITTED ON THE STOVE Proceed as follows:
• Open the stove door
• Remove the upper defl ector (a)
• Move the side panels forwards (b-c)
• Remove the rear part of one of the two side panels (b)
• Remove the front part of the side panel (c)
• Remove the front and rear parts of the other side panel
• Remove the bottom (d)
• Remove the hearth (e)
a
b
c
e
FITTING THE OPTIONAL CAST IRON PARTS
• Open the stove door
• Insert the hearth (1)
• Insert the ignition unit cap (2)
• Insert the bottom (3)
• Insert the side panels (4-5)
• Insert the defl ector (6)
Safety risks may be caused by:
• components being dropped accidentally
• installation operations carried out with electricity connected. INSTALLATION SHOULD ONLY BE CARRIED OUT
WITH THE ELECTRICAL POWER DISCONNECTED
THE PARTS IN THE MANUAL ON
FITTING ARE ONLY FOR THE USE
OF QUALIFIED PERSONNEL
No tools are needed to fi t the items
FITTING THE COMPONENTS
d
Proceed as follows:
a
b
c d
e
7