Safety Information; Eco-Friendly - ASA Electronics ASABG6 Manual Del Usuario

SAFETY INFORMATION

•
To ensure full satisfaction with the product, please read the entire instruction manual.
•
Keep instructions for future reference.
•
Follow all operation guidelines and adhere to all safety warnings and cautions to ensure safe use.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
•
Only use attachments/accessories specified by the manufacturer.
•
Never use harsh cleaning agents. Clean only with mild cleaner and soft cloth.
When Driving
Keep the volume level low enough to be aware of your surroundings.
Protect from Water
Do not submerge, as this can cause electrical shorts, fire or other damage. Avoid power washing amplifier as water pressure
may exceed IPX5 water rating.
Protect from High Temperatures
Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vehicle. Give the
interior a chance to cool down before starting playback. Do not mount the radio within close proximity of the engine
compartment.
Use the Proper Power Supply
This product is designed to operate with a 12 volt DC negative ground battery system.
WARNING:
•
DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANY WAY. Doing so may result in fire, electric shock or
product damage.
•
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSE. Failure to do so may result in fire, electric shock or
product damage.
•
DO NOT INSTALL IN LOCATIONS THAT MIGHT HINDER VEHICLE OPERATION. Doing so may obstruct vision or
hamper movement which can result in a serious accident.
•
INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR SHARP METAL EDGES. Route
the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring. If the
wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wire's insulation from being cut by
the metal edge of the hole. It is also recommended to apply sealing caulk to any opening that may potentially allow water
to enter.
•
Be sure to choose a location that is flat and has clearance above the unit to prevent any damage, as well as allow for
ventilation. Please orient and mount horizontally or vertically if possible.
•
Before drilling any holes, carefully inspect the area underneath and behind the mounting surface where the device will be
mounted to make sure it will not interfere with existing wires, fuel lines, the fuel tank or any other objects that could be
damaged.
•
Always disconnect the vehicle negative battery terminal during installation to prevent accidental shorting.

ECO-FRIENDLY

To make this planet a better place, minimal packing materials are used in ASABG6 digital amplifier: packing box, foamed plastic
and polyethylene.
ASABG6 digital amplifier contains recyclable materials, please comply with your country's laws and regulations regarding
disposal of batteries, packing materials and e-waste.
Product design appearance, parameters and accessories are subject to the actual product. Specifications are subject to
change without prior notice
to the product and have no obligation to make adjustments to earlier products.
.
All trademarks are the property of their respective owners
.
We reserve the right to make changes
2
ASABG6