Operation; Safety Notes - Berner LCD Plus II Manual De Instrucciones

5-year warranty
Berner instruments are subject to strict quality control standards. If, during the course of
normal daily use, a fault should occur, we provide a 5-year warranty (valid only with in-
voice). We will repair production or material defects free of charge upon return, provided
the instrument has not been tampered with and is returned to us unopened. Damages
resulting from dropping or improper handling are not covered by the warranty.
Please contact:
Berner Trading
Holding GmbH
Bernerstrasse. 6
D-74653 Künzelsau www.Berner.eu
German
Certificate of quality
All activities and processes carried out within Berner Trading Holding GmbH relating to
quality are monitored permanently within the framework of a Quality Management Sys-
tem. Furthermore, Berner Trading Holding GmbH confirms that the testing equipment
and instruments used during the calibration process are subject to a permanent inspec-
tion process.
Declaration of conformity
The product conforms to the present directives. For more detailed information, go to
www.Berner.eu

Operation

Thank you very much for deciding on the Berner Multitester LCD Plus II, a two-pole vol-
tage tester with LCD display. DC voltages of 4 V to 1400 V and AC voltages of 3 V to
1000 V, polarity, rotating field and continuity tests of up to 50  can be carried out, as
well as FI/RCD tests and resistance measurements up to 1999 . Due to its rotary dis-
tance piece, it is possible to operate with one hand for voltage measurement.
Because of the high protection class (IP65), the Berner Multitester LCD Plus II can also
be used under rough conditions.

Safety notes

You have decided on an appliance that offers you a high degree of safety. It conforms to
the standards DIN VDE 0682-401, IEC/EN 61243-3. In order to ensure safe and correct
application, before using initially it is necessary to fully read these operating instructions.
T: +49 7940 121-0
F: +49 7940 121-203
info@Berner.eu
16