Berner LCD Plus II Manual De Instrucciones página 17

The following safety precautions are applicable:
Immediately before using, carry out a function
|
check of the voltage tester (VDE regulation
0105, Part 1- Operation of elec. installations).
Make sure that the connecting lines and
appliance are fully serviceable. Check the
appliance on a known source of voltage, e.g.
230 V socket.
Hereby, if the display fails to indicate one or
|
more functions, do not use the appliance and it
must be checked by a specialist.
Only hold the appliance by the handles, avoid
|
touching the probes!
Only carry out for isolation from the power
|
supply on both poles!
The appliance must not be operated in a moist
|
environment!
Do not use with the battery compartment open!
Whilst replacing the battery, the connecting
lines must be removed from the measurement
circuit
| Correct indication is ensured in the temperature
range of -10 °C − +55 °C.
Always keep the appliance dry and clean. The
|
housing can be cleaned using a moist cloth.
The additional warning symbol and acoustic
|
indications for voltages > 35 V are only for
warning of hazardous voltages, not for
measurement.
Before the test, check the audibility of the
|
warning sound at the ambient volume.
Immediately replace the batteries when the
|
battery icon is displayed.
17