Skil 1930 Manual Original página 7

eyes and immediately turn your
head away from the beam
• Do not make any modifications to
the laser equipment
• Have the measuring tool repaired
only through qualified specialists
using original spare parts (this
ensures that the safety of the
measuring tool is maintained)
• Do not allow children to use
the laser measuring tool
without supervision (they could
unintentionally blind other persons or
themselves)
• Do not operate the measuring tool
in explosive environments, such
as in the presence of flammable
liquids, gases or dusts (sparks can
be created in the measuring tool which
may ignite the dust or fumes)
EXPLANATION OF SYMBOLS ON
TOOL
2 Read the instruction manual before
use
3 Do not dispose of electric tools and
batteries together with household
waste material
4 Laser radiation / Do not stare into
beam / Class 2 laser product
USE
• Charging battery 5
! the battery supplied is partially
charged (to ensure full capacity
of the battery, completely charge
the battery in the battery charger
before using your power tool for
the first time)
! read and follow the instruction
delivered with the charger or
power supply
- only use a charger or power supply
which has an output voltage of 5V
and output current of ≥0.5A
- connect charger cable H with
both charger or power supply (not
standard included) and charger
interface J
- when connected, the tool will turn
on and the battery level indicator 6
will start blinking
- charging is completed when the
battery level indicator stops blinking
and a full battery is indicated
- remove the charger cable H
from the tool, or when it remains
connected the tool will turn off after
approx. half an hour
• Battery level indicator 6
- during use the battery level indicator
on the display indicates the
remaining battery capacity
• On/off
- press main button G to turn on
the tool
! the laser beam is automatically
activated when the tool is turned
on
- press and hold main button G for 1
second to turn off the tool
• Change units
! the default setting before first
use is meters
1
- press and hold main button G to turn
on the tool
- continue to press main button G
for more than 2 seconds until the
desired measurement unit (feet/inch
or meter) is displayed
- release main button G to select the
measurement unit
2
- press main button G to turn on
the tool
- press and hold UP button D to
select a different measurement unit
• Select measuring mode
- press UP D or DOWN button E
to select the different measuring
modes
• Single-distance measurement 8
- when you turn on the tool, the
default measuring mode is single-
distance measurement with the
laser activated (see blinking laser
indicator 7 a)
- if you select the distance mode by
pressing UP D or DOWN button
E the laser might not be activated
automatically (see laser indicator
7 b), but only after pressing main
button G
- with the laser beam activated, aim
the laser at the target
- press the main button G to take a
measurement (and automatically
deactivate the laser)
7