Troubleshooting - Eldom puri PO200 Manual De Instrucciones

Fig. 3
MAINTENANCE
Note: Turn off the unit and unplug it before any maintenance or repair begins to avoid electric
shock.
CLEANING
Unplug the unit before any cleaning. Clean the housing with a soft moisture cloth. Do not use
chemical solvent (such as benzene, alcohol, gasoline). The surface may be damaged or even the
whole case may be deformed. Do not sprinkle water on the unit.
STORING THE DEVICE
If the purifier is not used for a longer period of time:
- Unplug the power cord from the socket and roll it.
- Store the dehumidifier in a cool, dry place, inaccessible to sun rays, high temperature or excessive
dust.
TROUBLE SHOOTING
Before contacting the service centre, you should compare the symptoms given by the device with
those listed below. The list includes normal situations which are not caused by a manufacturing
defect or defective material.
PROBLEM
The appliance won't turn on
Insufficient air flow
Excess noise
ENVIRONMENTAL PROTECTION
- the appliance is made of materials which can be recovered or recycled
- the appliance should be handed over to the appropriate centre of collection and recycling of electrical and electronic
equipment.
WARRANTY
- the appliance is intended for personal use at a household,
- it is not intended for professional purposes,
- in case of misuse, the warranty is rendered null and void.
12 EN
SOLUTION
Check whether the device is connected to the mains and press the button "POWER" (F).
Check whether the cap (3) is properly set.
Check whether the outlet is not clogged by foreign objects.
Check whether the filter is clean and whether the security elements were removed from a
new filter.
Check whether larger pollutants are near the appliance.
Check whether the filter is clean.
Check whether the device is placed on flat surface.