Double Din Head Unit Provision - Metra 95-8214 Instrucciones De Instalación

Double DIN head unit provision

1. Attach the DDIN radio housing brackets
to the DDIN radio housing. (Figura A)
2. Slide the aftermarket DDIN radio into
the radio housing/bracket assembly and
secure it with the screws supplied with
the radio. (Figura B)
3. Secure the DDIN radio/housing
assembly into the sub dash using the
factory hardware. (Figura C)
4. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5. Reassemble dash in reverse order of
disassembly using the 95-8214 Radio
Housing Trim Plate instead of the
factory panel.
Kit Assembly 95-8214
6
(Figura A)
(Figura B)
(Figura C)