Descargar Imprimir esta página

Kit Assembly; Kit Preparation - Metra 95-8214 Instrucciones De Instalación

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Attach the clock/hazard switch bracket
to the radio housing using the (4) #6 x
3/8" Phillips pan head screws.
(Figura A)
WARNING: DO NOT
OVERTIGHTEN SCREWS.
2. Clip the clock/hazard switch assembly
into the 95-8214 radio housing trim
panel. (Figura B)
3. Install the four included panel clips to
the back of the Radio Housing Trim
Panel (factory clips can also be used
if desired).
Continued on next page

Kit Assembly 95-8214

Kit Preparation

5
(Figura A)
(Figura B)

Publicidad

loading