IKEA TRADFRI E1766 Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
WIRELESS OPEN/CLOSE
REMOTE FUNCTIONS
UP:
Press to move your wireless roller
blind up..
DOWN:
Press to move your wireless roller
blind down.
Pairing: Add IKEA Home smart
products to your system. See
instructions below.
IMPORTANT NOTE: You need the Signal
Repeater to be able to steer your blinds
with the wireless Open/Close remote!
ADDING DEVICES TO YOUR
WIRELESS OPEN/CLOSE REMOTE
When the wireless Open/Close remote
is sold together with a wireless roller
blind and a Signal Repeater (in the same
package), they are already paired.
To add more wireless roller blinds, just
repeat the steps below:
Make sure that your wireless roller blind
is turned on.
1 Open the back cover of the Open/
Close Remote and find the pairing
button.
2 Short press on both buttons on the
blind. This will make the device awake
and ready for pairing for 2 minutes.
3 Hold the Open/Close remote very
close to the wireless roller blind you
want to add: no more than 5 cm away
from
.
4 Press and hold the pairing button for
at least 10 seconds on the wireless
Open/Close remote.
5 A red light will shine steadily on the
Open/Close remote. On your wireless
roller blind a white light will begin to
dim and flash until the devices have
been successfully paired.
Up to 4 wireless roller blinds can be
paired with 1 Open/Close remote.
Make sure to pair them one at a time.
If you have difficulties paring multiple
blinds, temporarily disconnect those
that have already been paired by
removing the battery cell inside. This
will help with the pairing process.
USING YOUR WIRELESS
ROLLER BLINDS
Move blind up to top position using
Open/Close remote
Press the up button once (short press)
on the Open/Close remote
Move blind down to preset level using
Open/Close remote
Press the down button once (short
press) on the Open/Close remote
Move up blind using
Open/Close remote
Press and hold the up button on the
Open/Close remote
While pressing the button the blind
is raised (until wished position or top
position has been reached), if the
button is release the blinds stop.
Move down blind using
Open/Close remote
Press and hold the down button on the
Open/Close remote
4

Publicidad

Tabla de contenido
loading

Tabla de contenido