Intended Use; Improper Use; Safety Requirements - Stiga NJ 92 Serie Traducción Del Manual Original

Intended use

This machine was designed and built to cut
grass.
The use of special attachments provided for
by the Manufacturer as original equipment or
which may be purchased separately, allows this
work to be done in various operating modes,
illustrated in this manual or the instructions that
accompany the single attachments.
Likewise, the intended use can be extended to
include other functions by applying supplemen-
tary attachments (if provided for by the Manu-
facturer), abiding by the restrictions and condi-
tions indicated in the instructions accompanying
the attachment.
User types
This machine is intended for use by consumers,
i.e. non-professional operators. The machine is
intended for "DIY" use only.

Improper use

Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm
persons and/or damage things. Examples of im-
proper use may include, but are not limited to:
– t ransporting people, children or animals on
the machine or on a trailer;
– t owing or pushing loads without the use of the
specified attachment for towing;
– u se of the machine for riding over unstable,
slippery, icy, stony, rough, marshy ground or
puddles that do not allow the consistency of
the ground to be assessed;
– u sing the cutting means on surfaces other
than grass.
– u se of the machine for leaf or debris collec-
tion;
Improper use of the machine will invalidate the
warranty, relieve the Manufacturer from all li-
abilities, and the user will consequently be liable
for all and any damage or injury to himself or
others.
2.2 IDENTIFICATION LABEL AND
MACHINE COMPONENTS
(see figures on page ii)
1. Acoustic power level
2. CE conformity marking
3. Year of manufacture
4. Operating engine power and speed
5. Type of machine
6. Serial number
7. Weight in kg
8. Name and address of Manufacturer
9. Type of transmission (if indicated)
10. Article code
The example of the Declaration of Conformity is
provided on the penultimate page of the manual.
/–––/–––/–––/–––/–––/–––/–––/
Write the serial number of your machine (6)
here.
As soon as you have purchased the machine,
do not forget to write the identification numbers
(3 - 5 - 6) in the spaces on the last page of the
manual.
The machine is composed of a series of main
components that have the following functions:
11. Cutting-means assembly: this is the cas-
ing that houses the rotating cutting means.
12. Cutting means: these are what cut the
grass; the fins at the ends help convey the
cut grass towards the collector channel.
13. Collector channel: this is the part con-
necting the Cutting-means assembly to the
grass catcher.
14. Grass catcher: as well as collecting the
grass cuttings, this is also a safety element
that stops any objects drawn up by the cut-
ting devices from being hurled away from
the machine.
15. Rear discharge guard (available upon
request): this can be fitted in place of the
grass catcher and prevents objects from
being drawn up by the cutting means and
hurled away from the machine.
16. Engine: this moves the cutting means and
drives the wheels. Its specifications and
regulations for use are described in a spe-
cific manual.
17. Battery: provides the energy for starting the
engine. Its specifications and regulations for
use are described in a specific manual.
18. Driving seat: this is where the machine
operator sits. It has a sensor connected to
safety devices for detecting the presence of
the operator.
19. Warning and safety labels: these give
reminders on the main regulations for work-
ing in safety.
20. Inspection hatch: for access to the bat-
tery; it is fixed by a screw and should always
be closed while the machine is in use.

2.3 SAFETY REQUIREMENTS

Your machine should be used with due care and
attention. Therefore, labels have been placed
on the machine to remind you pictorially of the
main precautions to take during use. These
labels are to be considered an integral part of
5