Install The Grass Catcher; Install The Mulch Plug; Install The Side Discharge Chute; Set The Cutting Height - GreenWorks Pro MO60L05 Manual Del Operador

6.4

INSTALL THE GRASS CATCHER

5
1. Remove the mulch plug.
2. Remove the side discharge chute.
3. Open the rear discharge door and hold it.
4. Hold the the grass catcher (8) by its handle and engage
the hooks (16) on the door rod (17).
5. Close the rear discharge door.
6.5

INSTALL THE MULCH PLUG

1. Remove the grass catcher.
2. Open the rear discharge door (5) and hold it.
3. Hold the mulch plug (9) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
English
6.6
17
16
8
1. Open the side discharge door (10) and hold it.
2. Line up the recesses of the side discharge chute (11)
3. Close the side discharge door (10).
6.7
The machine can be set to different cutting heights.
5
9
1. Pull the height adjustment lever (6) rearward to increase
2. Pull the height adjustment lever forward to decrease the
9
INSTALL THE SIDE DISCHARGE
CHUTE
11
CAUTION
When you use the side discharge chute,
• Do not install the grass catcher.
• Keep the mulch plug installed.
below the pivot (18).

SET THE CUTTING HEIGHT

the cutting height.
cutting height.
10
18
6
EN