Dialling Pause; Insert A Dialling Pause; R-Button And Supplementary Services; Setting The Flash Time - Amplicomms BigTel 40 Plus Manual Del Usuario

Dialling pause

When using private branch exchanges, it is necessary to dial an access
code to obtain the dialling tone for an outside line. When using some
older private branch exchanges, it takes a little time before the dialling
tone becomes audible. In the case of such private branch exchanges, a
dialling pause can be inserted after the number for an outside line in order
to continue dialling directly without having to wait for the dialling tone.

Insert a dialling pause:

Press .
After dialling the number for the outside line, the telephone waits approx.
3 seconds before dialling the actual phone number.

R-button and supplementary services

Your telephone supports supplementary services provided by your
telephone network provider, such as brokering, call waiting and
conference facilities.
These supplementary services can be used by implementing the R button.
Contact your telephone network provider with regard to enabling
supplementary services.

Setting the Flash time

Set the required Flash time using the sliding switch located on the
underside of the telephone. You can select between 100 ms and 300 ms.

In Case of Problems

Service Hotline

Should problems arise with the telephone, please refer to the following
information first. In the case of technical problems, please contact our
service hotline. The number of our service hotline can be found on our
web site: www.amplicomms.com
In the case of claims under the terms of guarantee, please contact your
sales outlet. There is a 2 year period of guarantee.

No telephone calls possible

The telephone line is not connected properly or is defective. Only use the
telephone connection cable supplied.
12

Maintenance / Guarantee

Maintenance

Clean the housing surfaces with a soft, fluff-free cloth.
•
• Never use cleaning agents or solvents.

Guarantee

AMPLICOMMS equipment is produced and tested according to the latest
production methods. The implementation of carefully chosen materials
and highly developed technologies ensure trouble-free functioning and
a long service life. The terms of guarantee do not apply where the cause
of equipment malfunction is the fault of the telephone network operator or
any interposed private branch extension system. The terms of guarantee
do not apply to the batteries or power packs used in the products. The
period of guarantee is 24 months from the date of purchase.
All deficiencies related to material or manufacturing errors within the
period of guarantee will be redressed free of charge. Rights to claims
under the terms of guarantee are annulled following tampering by the
purchaser or third parties. Damage caused as the result of improper
handling or operation, normal wear and tear, incorrect positioning or
storage, improper connection or installation or Acts of God and other
external influences are excluded from the terms of guarantee. In the case
of complaints, we reserve the right to repair defect parts, replace them or
replace the entire device.
Replaced parts or devices become our property. Rights to compensation
in the case of damage are excluded where there is no evidence of intent
or gross negligence by the manufacturer.
If your device does show signs of a defect within the period of guarantee,
please contact the sales outlet where you purchased the AMPLICOMMS
device, producing the purchase receipt as evidence. All claims under the
terms of guarantee in accordance with this agreement can only be
asserted at the sales outlet. No claims under the terms of guarantee can
be asserted after a period of two years from the date of purchase and
hand-over of the product.
13