Electrical Safety and Emission Statement Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Página 4
Viktig: Tillegg A inneholder oversatt sikkerhetsinformasjon for installering av dette utstyret. Når du ser , åpner du til Tillegg A for å finne den oversatte sikkerhetsinformasjonen på ønsket språk. Importante: O Anexo A contém advertências de segurança traduzidas para instalar este equipamento.
Table of Contents Electrical Safety and Emission Statement ..........iii Table of Contents ................... v Welcome to Allied Telesyn ................. vii Where to Find Web-based Guides..............vii Document Conventions..................vii Contacting Allied Telesyn ................viii Online Support ..................viii For Technical Support and Services............viii Technical Support E-mail Addresses ............viii...
All web-based documents relating to this product and other Allied Telesyn products can be downloaded from the web site in pdf format. Document Conventions This guide uses several conventions that you should become familiar with first before you begin to install the product.
Contacting Allied Telesyn There are several ways to contact Allied Telesyn technical support: online, telephone, fax and e-mail. Online Support You can request technical support online by filling out the Tech-Assistant Form at www.alliedtelesyn.com/support.htm. For Technical Support and Services Americas...
Fax: international code + 425-489-9191 FTP Server If you know the name of a specific driver that you need for an Allied Telesyn device, you can download the software by connecting directly to our FTP server at ftp://gateway.centre.com. At login, enter ‘anonymous’. Enter your e-mail address for the password as...
If you have any comments or suggestions on how we might improve this or other Allied Telesyn documents, please fill out the “AT-B15 and AT-B17 Quick Install Guide Feedback” on page 25 and return the form to us at the address or fax number provided.
1. The maximum distance can be less depending on the type of fiber optic cabling used with the port and the duplex mode of the end node. Caution The expansion modules are designed for the AT-8324SX Fast Ethernet Switch only. Do not install these modules in any other Allied Telesyn device.
Verifying the Package Contents Check to be sure that your module package contains the following items. If any of the items are missing or damaged, contact your Allied Telesyn representative. " One AT-B15/SX, AT-B15/LX, or AT-B17 Expansion Module "...
AT-B15 and AT-B17 Quick Install Guide Reviewing Safety Guidelines Please review the following safety guidelines before you begin to install the expansion module in the switch. Warning Class 1 laser product. ! 4 Warning Do not stare into the laser beam. Warning Electric Shock Hazard: To prevent electric shock, do not remove the cover.
Reviewing Connectivity Guidelines The AT-B15/SX has one 1000BASE-SX fiber optic port with an SC connector. This module operates at 1Gbps and supports auto-negotiation for duplex mode (half- or full-duplex) and flow control. Refer to Table 2 for the cabling specifications for this module.
Using a flathead screwdriver, remove the faceplate from either the lower right (slot A) or the lower left (slot B) expansion slot, as shown in Figure 4. Allied Telesyn recommends installing the module in the lower right expansion slot (slot A) and reserving the lower left slot for the optional AT-STACK1 Stacking Module.
Página 16
Figure 4 Removing a Faceplate Note Keep the original faceplate for future use. If you should remove the module, replace the faceplate to prevent dust and debris from entering the unit and to maintain proper air flow. Caution Be sure to wear an anti-static wristband while performing the next step. The AT-STACK1 module can be damaged by electrostatic discharge.
Página 17
LED indications. If the module does not respond, see "Troubleshooting" below. More details concerning connection options and network applications can be found in the AT-8324SX Fast Ethernet Switch Installation Guide, which is available from the Allied Telesyn web site.
Flashing Traffic is passing through the port. Troubleshooting If you experience any problems with the module, check the following items before contacting Allied Telesyn Technical Support: " Ensure the switch with the module is powered up. " Ensure that the device attached to the module is powered up and operating correctly.
AT-B15 and AT-B17 Quick Install Guide Technical Specifications Table 5 lists the technical specifications for the expansion modules. Table 5 Technical Specifications Ports One 1000BASE-SX with SC connector AT-B15/SX One 1000BASE-LX with SC connector AT-B15/LX Two 100BASE-FX with SC connectors AT-B17 Cable Type 50/125 or 62.5/125 micron multimode fiber...
Página 20
CE Mark EN55022 (CISPR22) Class A Compliances VCCI Class A C-Tick Standards IEEE 802.3z, ISO/IEC 8802-3 AT-B15/SX IEEE 802.3z, ISO/IEC 8802-3 AT-B15/LX IEEE 802.3, IEEE 802.3u, ISO/IEC 8802-3 AT-B17 Certification FCC Class A, VCCI Class A, CISPR Class A Emissions...
Appendix A Translated Safety and Emission Information Important: This appendix contains multiple-language translations for the safety statements in this guide. Wichtig: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. Vigtigt: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog.
Página 22
Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Página 23
AT-B15 and AT-B17 Quick Install Guide ELECTRICAL - TYPE CLASS 1 EQUIPMENT THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts. PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be easily accessible.
Página 24
VORSICHT Die Entlüftungsöffnungen dürfen nicht versperrt sein und müssen zum Kühlen freien Zugang zur Raumluft haben. BETRIEBSTEMPERATUR: Dieses Produkt wurde für den Betrieb in einer Umgebungstemperatur von nicht mehr als 50° C entworfen. ALLE LÄNDER: Installation muß örtlichen und nationalen elektrischen Vorschriften entsprechen.
Página 25
AT-B15 and AT-B17 Quick Install Guide ALLE LANDE: Installation af produktet skal ske i overensstemmelse med lokal og national lovgivning for elektriske installationer. Eisen: Dit product voldoet aan de volgende eisen. RFI Emissie EN55022 Klasse A EN60555-2 (1995) Klasse A EN60555-3 WAARSCHUWING: Binnenshuis kan dit product radiostoring veroorzaken, in welk geval de gebruiker verplicht kan worden om gepaste maatregelen te nemen.
Normes: ce produit est conforme aux normes de suivantes: Emission d’interférences radioélectriques EN55022 Classe A EN60555-2 (1995) Classe A EN60555-3 MISE EN GARDE : dans un environnement domestique, ce produit peut provoquer des interférences radioélectriques. Auquel cas, l’utilisateur devra prendre les mesures adéquates.
Página 27
AT-B15 and AT-B17 Quick Install Guide Standardit: Tämä tuote on seuraavien standardien mukainen. Radioaaltojen häirintä EN55022 Luokka A EN60555-2 (1995) Luokka A EN60555-3 VAROITUS: Kotiolosuhteissa tämä laite voi aiheuttaa radioaaltojen häiröitä, missä tapauksessa laitteen käyttäjän on mahdollisesti ryhdyttävä tarpeellisiin toimenpiteisiin. Kestävyys IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m)
Página 28
Standard: Questo prodotto è conforme ai seguenti standard. Emissione RFI (interferenza di radiofrequenza) EN55022 Classe A EN60555-2 (1995) Classe A EN60555-3 AVVERTENZA: in ambiente domestico questo prodotto potrebbe causare radio interferenza. In questo caso potrebbe richiedersi all’utente di prendere gli adeguati provvedimenti.
Página 29
AT-B15 and AT-B17 Quick Install Guide Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer. RFI stråling EN55022 Klasse A EN60555-2 (1995) Klasse A EN60555-3 ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. Immunitet IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m)
Página 30
Padrões: Este produto atende aos seguintes padrões. Emissão de interferência de radiofrequênciaEN55022 Classe A EN60555-2 (1995) Classe A EN60555-3 AVISO: Num ambiente doméstico este produto pode causar interferência na radiorrecepção e, neste caso, pode ser necessário que o utente tome as medidas adequadas.
Página 31
AT-B15 and AT-B17 Quick Install Guide Estándares: Este producto cumple con los siguientes estándares. Emisión RFI EN55022 Clase A EN60555-2 (1995) Clase A EN60555-3 ADVERTENCIA: en un entorno doméstico, este producto puede causar radiointerferencias, en cuyo caso, puede requerirse del usuario que tome las medidas que sean convenientes al respecto.
Página 32
Standarder: Denna produkt uppfyller följande standarder. Radiostörning EN55022 Klass A EN60555-2 (1995) Klass A EN60555-3 VARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vilket kan tvinga användaren till att vidtaga erforderliga åtgärder. Immunitet IEC 1000-4-2 (4 kV CD, 8 kV AD) IEC 1000-4-3 (1995) (3 V/m) IEC 1000-4-4 (1995) (1.0 kV - (power line);...
______________________________________________________________________ Detailed description (Please use separate sheet) Please also fax printouts of relevant files such as batch files and configuration files. When completed, fax this sheet to the appropriate Allied Telesyn office. Fax numbers can be found on page viii.
If there are topics you would like information on that were not covered in this guide, please photocopy this page, answer the questions and fax or mail this form back to Allied Telesyn. The mailing address and fax number are at the bottom of the page.