In, Out & Chapter Points From External Edit Lists - JVC BD-X200E Instrucciones

Synchronous Recording
In, Out & Chapter Points from External Edit Lists
When dubbing a tape edited using an external VCR or non-linear editor to a DVD, the edit list (or EDL) created during the editing
process can be used to automatically set the In Point, Out Point, and chapter marks.
Notes
● Loading of external edit lists is possible when CHAPTER CREATION from the RECORDER [2/2] MENU screen is set to
MANUAL.
● In order to be read, the EDL must be of CSV or Sony9100 format.
● The priority sequence for loading is CSV † Sony9100 † internally-made EDL.
● Chapter marks are inserted at GOP intervals (i.e., 15 frames). It will not be possible to insert chapter marks that are closer
together than this interval.
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT IN POINT 00:00:00:00
: : : : : :
h m s f h m s
00:00:00:00 00:15:00:00
1 2
4 00:25:00:00 5 00:30:00:00
7 00:40:00:00 8 00:45:00:00
TC INPUT
CHAPTER MANUAL
ADJ BITRATE 8.0 Mbps DISC REMAIN
TC SET EDL LOAD
TC CANCEL EDIT/END
EDL LOAD
Example 1: Loading a CSV-format EDL
JVC CSV
IN POINT
OUT POINT
Chapter1
Chapter2
Chapter3
Chapter4
Chapter5
● Line returns at the end of each line.
● Maximum of 98 chapter marks.
Example 2: Loading a Sony9100-format EDL
Recorder-In and Recorder-Out time codes are read from the X-source and Y-source rows, and these are then set as the
In Point, Out Point, and chapter marks for editing.
Set as the In Point
EDIT RECORDER-IN
0001 00:00:00:00
0002 00:10:00:00
0002 00:20:00:00
0003 00:30:00:00
00:40:00:00
0004
0004 00:40:00:00
00:50:00:00
0005
00:50:05:00
0005
Already set
E-68
OUT POINT 00:10:00:00
1.
: : :
f h m s f
00:20:00:00
3
6 00:35:00:00
9 00:50:00:00
2.
: : :
000 min
FINALIZE
00:00:00:00
01:00:00:00
00:10:00:00
00:20:00:00
00:30:00:00
00:40:00:00
00:50:00:00
Set as chapter marks
RECORDER-OUT
00:10:00:00
00:20:00:00
00:20:00:00
00:40:00:00
00:50:00:00
00:50:00:00
01:00:00:00
01:00:00:00
Set as the
Out Point
Set as a
chapter mark
Procedure
Transfer the external edit list to your BD-X200.
Select EDL LOAD from the REMOTE CONTROL screen and press
the SET button.
● The In Point, Out Point, and chapter marks are set in accordance with the
EDL.
REMOTE CONTROL SCREEN ( 9PIN MASTER )
IN POINT
EXIT
: : :
h m s f
1 00:10:00:00
4 00:40:00:00
7
: : :
CHAPTER
ADJ
BITRATE
TC SET
TC CANCEL
REMOTE CONTROL SCREEN ( 9PIN MASTER )
EXIT IN POINT
: : :
h m s
f
1 00:10:00:00
4 00:40:00:00
7
: : :
CHAPTER
ADJ
BITRATE
TC SET
TC CANCEL
00:00:00:00
OUT POINT 01:10:00:00
: : : : :
h m s f h m s
2 00:20:00:00 3 00:30:00:00
5 00:50:00:00 6
: :
8 9
: : : : :
: :
TC INPUT
MANUAL
8.0 Mbps 000 min
DISC REMAIN
EDL LOAD FINALIZE
EDIT/END
00:00:00:00 OUT POINT 01:00:00:00
: : : : :
h m s h m
f
2 00:20:00:00 3 00:30:00:00
5 6
00:50:00:00 00:50:05:00
8 9
: : : : :
: :
TC INPUT
MANUAL
000 min
8.0 Mbps DISC REMAIN
FINALIZE
EDL LOAD
EDIT/END
:
f
:
:
:
EDL LOAD
:
s
f
:
:
EDL LOAD