Charging The Appliance; Assembling The Appliance - Concept VP4140 Manual De Instrucciones

EN
Hand-held vacuum cleaner
15. Power button
16. Battery/charge indicator
17. Dust cup release button
18. LED indicator
19. Sealing ring
20. HEPA filter
21. External filter
22. Dust cup
23. Slot nozzle
23

ASSEMBLING THE APPLIANCE

Folding handle
To fold the handle, press the fold the handle button. When lifting the
handle vertically, it will automatically lock into the correct position.
Holes for wall
mounting
56
16
19
17 15
20
18
21
22
Off
Press
Assembling the charging base
The charging base must be placed on a flat surface, using screws
and wall plugs it can be attached to the wall. The assemble the
base, slide the upper part into the base.
Place the screws and wall plugs on the underside of the charging
base. Drill holes into the wall and insert the wall plugs into the
holes. Then, fasten the charging base with the screws.
VP4140 | VP4150 | VP4151 | VP4160
Removable turbo nozzle

CHARGING THE APPLIANCE

1. Insert the hand-held vacuum cleaner into the rod vacuum cleaner. Ensure that the rod vacuum cleaner is off.
2. Place the rod vacuum cleaner into the charging base. Ensure that the charging base is placed on a level and
stable surface. Make sure there is no dust between the hand-held vacuum cleaner and the rod vacuum cleaner. If
necessary, clean the contacts.
3. Plug the power cord into the socket. The charging indicator lights up red, indicating that the vacuum cleaner is
charging. When charging, it is normal for the vacuum cleaner or the charging base to heat up.
Note: Even if the rod vacuum cleaner is on, if it is placed in the charging base, it automatically shuts off. While the rod
vacuum cleaner is charging, the vacuum cleaner has a current protection element. Even if you press the power button,
the appliance will remain switched off.
Adaptor slot
VP4140 | VP4150 | VP4151 | VP4160
EN
Turbo nozzle release
button
LED light
LED indicator
57