Rdnet Connections - dBTechnologies VIO W10 Manual Del Usuario

English

RDNET CONNECTIONS

For remote control, connect the Data Input (7) of the first monitor to the hardware controller (RDNet Control
2 or RDNet Control 8) with cables equipped with ethernCON connectors. Then connect the Data Output (8)
of the first monitor to the Data Input (7) of the second monitor, and so on. When the network is completed
and the devices switched on, the "Link" LEDs are lit. The other "Active" LEDs will start flashing when data
traffic is present. "Remote Preset Active" LEDs
VIO W10 Code 420120291 REV.1.0
27