Delta 50-850 Manual De Instrucciones página 11

ASSEMBLING FILTER AND DUST
COLLECTION BAGS TO DRUM
Disconnect the machine from the
power source!
1. Hook the loop on the top of filter bag (A) Fig. 17,
onto filter bag support rod (B) as shown.
2. Assemble extension rod (C) Fig. 18, onto the end
of filter bag support rod (B). Raise support rods (B)
and (C), with filter bag (A) attached and place end
of support rod (C) into holes of bracket (D). NOTE:
Flared end of filter bag extension rod will prevent the
rod from sliding through bracket.
3. Position open end of filter bag (A) Fig. 18, over lip of
dust drum (E). Insert locking band (F) Fig. 19, through
the loops of filter bag (A) and fasten with clamp (G)
as shown in Fig. 20. NOTE: Make certain locking
band is positioned in the channel of drum (F) before
fastening clamp.
4. Pull up on each retaining clip (A) Fig. 21, and insert
the dust collection bag (B) underneath each retaining
clip to hold the dust collection bag in place.
5. Place the locking clamp (C) Fig. 21 around dust
collection bag and dust collector drum and lock in
place.
NOTE: Make certain locking clamp is positioned in the
channel of the dust collector drum before locking clamp.
Fig. 20
E
G
Fig. 17
Fig. 18
B
C
Fig. 19
A
E
Fig. 21
A
B
11 -
English
A
B
D
F
G
A
E
C