Humanscale M/FLEX Instrucciones De Montaje página 6

Soporte de escritorio
Ocultar thumbs Ver también para M/FLEX:
Tabla de contenido

Publicidad

Smart Stop Adjustment
A Smart Stop Ring is included at every Quick Attach joint.
Position the Smart Stop Ring to limit the arm's range of motion.
The marked angle will be in the center of the range of motion.
NOTE: The stop rings must be configured in such a way that does
not allow the monitor to pass behind the rear edge of the unit.
Attach Arms To Bracket
Before adding each link, adjust the Smart Stop according to
Step 3. In a triple link configuration, one must be a 4" link.
1
Insert the first link into the mount until the release
button (A) locks in place.
2
Insert the next link into the first link.
3
To remove a link, press the release button and lift
upward near the joint.
NOTE: The installation order of the links must not allow the
monitor to pass behind the rear edge of the unit.
6
Arm can rotate
without stopping
Arm can rotate 180˚
Arm can rotate 90˚
A

Publicidad

Tabla de contenido
loading

Tabla de contenido