Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
10
OPERATION
Getting Started
Unpack the jukebox and all accessories. Remove all protective material.
Connect to a household mains socket, using the supplied AC/DC adaptor (see
p. 10). Press ON/OFF to switch the device on.
Basics
•
MODE: Press MODE repeatedly to toggle between the device modes
FM, CD, USB, SD, BT and Phono.
•
Output volume: Use VOL+/- to adjust.
•
Line Out: If you have connected your jukebox to any external audio
devices such as a PA or HiFi, use the LINE OUT switch on the rear to
activate/de-activate the audio output.
•
Setting the clock: After switching on, the display will show 00:00.
Press and hold PROG for 3-5 secs., then use the arrow buttons to select
the clock display format (12h/24h). Confirm by pressing PROG. The first
digits will now flash. Use the arrow buttons to adjust the hour. Confirm
with PROG. Repeat the procedure for the minute digits.
Note: The time will be reset to 00:00 when the device is disconnected
from the mains power supply.
RADIO
Completely unfold the antenna on the rear. After switching the device on,
press MODE to switch to FM mode. Use the arrow buttons to adjust the
desired receiving frequency (shown on display). To save the current station
to presets, press PROG, then use the arrow buttons to select the desired
preset. There are a total 20 presets available. Press PROG again to confirm
and continue.
Publicidad
Capítulos
Tabla de contenido
