Time Zone Setting - La Crosse Technology Original WS9090 Manual De Instrucciones

1. Use the MIN/MAX/+ key to select the "12h" or "24h" display mode.
2. Press the SET to confirm and to enter the
Note: When 24h mode display is selected, the calendar format will be "Weekday.
Day. Month" display. When 12h mode display is selected, the calendar format
will be "Weekday. Month. Day" display.

TIME ZONE SETTING

The time zone can be set between
1. The time zone starts flashing.
2. Use the MIN/MAX/+
2...-12, 12, 11, 10... 2, 1, 0, in consecutive 1-hour intervals.
3. Press the SET key to confirm and enter the
mode.
TIME RECEPTION ON/OFF SETTING
In area where reception of the radio-controlled time (DCF time) is not possible, the
time reception function can be turned OFF. The clock will then work as a normal
Quartz clock. (Default setting is ON).
Time zone setting
±12 hours (default 0 hour):
Time zone (flashing)
key to change the time zone.
34
mode.
The range runs from 0, -1, -
Time reception ON/OFF setting
flashing