Using The Telephony Function - Parrot MINIKIT Guía De Instalación Rápida

the «Support» heading on the www.parrot.com website).
2. Select «MINIKIT».
3. Enter « 1234 » on your phone when prompted.
> The Parrot MINIKIT says «pairing successful» when both
devices are connected. The device sounds a beep when
connected.
You can pair up to five devices. If you attempt to pair
a sixth phone, the kit says «memory full». You must
clear the memory by holding down both the red and
green buttons for three seconds. Doing so also clears
all the contacts and the associated voiceprints.


Using the Telephony function

Buttons Functions
- Navigate through the menus
- Adjust the communication volume
- Short press : confirm a selection
- Short press during a call : use the
DTMF function (to manage interactive
vocal servers)
- Answer an incoming call
- Use the voice recognition function
- Long press: call the last dialed number
- Short press during a call : transfer an
ongoing call on the phone (discreet mode)
- Refuse an incoming call
- End a call
- Exit the menu
To make a call manually, dial the number using the
phone's keypad and start the call. The call automati-
cally changes to hands-free mode. Otherwise, press
the green button on the Parrot MINIKIT.