Publicidad
Step 19
Insert a SLIDE CAM (10A) into the SMALL DRAWER SIDES (D18 and D19).
å
Fasten the DRAWER SLIDES (EE and FF) to the SMALL DRAWER
å
SIDES (D18 and D19). Use four GOLD 5/16" FLAT HEAD SCREWS (3S)
through holes #1 and #3.
NOTE: The DRAWER SLIDES are marked "DRAWER RIGHT" and
å
"DRAWER LEFT" for easy identifi cation.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
Fasten a PULL (176K) to the SMALL DRAWER FRONT (W). Use two
å
SILVER 1/2" MACHINE SCREW (38S).
Repeat this step for the other small drawer.
å
FF
2
3
176K
SILVER 1/2" MACHINE SCREW
(4 used for the PULLS)
Page 24
Roller end
1
D19
W
38S
10A
D18
2
3
3S
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
424127
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
Roller end
1
EE
www.sauder.com/services
Publicidad
