Setting Alarm Times; Sleep Mode - Microlife BP 3AX1 Manual De Instrucciones

4.3. Setting Alarm Times

After you have set the time, you can set one or two alarms to
alert you to take your blood pressure measurements. An alarm
icon appears in the display.
Press ▲ or ▼ to set the hour and minute for Alarm 1. Press OK
to confirm each setting.
When the alarm icon is highlighted, press ▲ or ▼ to enable
or disable Alarm 1. Press OK to confirm.
You are then prompted to set Alarm 2. Follow the instructions for
Alarm 1 to set this alarm.
After setting the alarms, press OK to exit the Time and Date
Setup. An alarm icon
the alarm is activated.
Attention!
The time display is set on a 24-hour clock.
When the final field DISPLAY OFF is highlighted, press ▲ or ▼
to select whether you want the time and date display to remain
on when the device is switched off. Press OK to confirm the
settings and exit the time setup screen.

4.4. Sleep Mode

The device is designed to stay in sleep
mode as batteries are loaded. The
illustration shows the display elements,
when the BPM is in sleep mode, and the
DISPLAY OFF feature is disabled (see
Section 4.2).
8
appears in the display to indicate that
Apr 17 2003
JOHN MAM
Feb 24 2003
8:15
Display
Off
Feb 24 2003
8:15
Display
Off
Feb 24 2003
10:30
Display
Off
Date
Time
(24-hour format)
Alarm active
Microlife Average
Mode is selected
Current user