All manuals and user guides at all-guides.com
MOUNT THE SUPPORT WASHERS
Insert the washers into holes "C" and "D" in the metal supports and fasten
them with the nuts.
Turn the apparatus upside down and insert the bent end of the bracket
into hole "A" in the support (Fig. 1 and 2).
Place the support between the first and second element and fasten the
bracket (Fig. 3 and 4).
Insert the other threaded end into hole "B" and tighten the wing nut
(Fig.5).
Mount the other bracket as described above, positioning it on the last
element of the radiator.
2
4
1
3
5
Before connecting or disconnecting the appliance, make sure that all the
switches are in the OFF position.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch (2) in the desired position and turn the temperature
switch (1) clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle (1)
slowly, in a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The indicator light indicates that the appliance is operating and will switch
off when the adjustable thermostat is activated.
The appliance is also equipped with a daily timer that allows the user to
set the automatic turn-on and turn-off of the appliance (provided on item
R11BT only). Before replacing the appliance in its package, make sure it
has cooled sufficiently.
OPERATION WITH TIMER (ITEM R11BT ONLY)
To operate the unit in continuous mode, turn the switch to the symbol I.
For scheduled operation, turn the switch to the clock symbol.
To program the device, first you need to set the TIMER by positioning the
arrow (2) on the correct time during the setting phase.
Select the operation period by opening the teeth (3) outwards. During
the period in which the teeth are open, the unit is on; instead, when the
TIMER reaches the period in which the teeth are closed, it turns off.
16