Product Description; Intended Use; Scope Of Delivery; Device Description - Bosch 0 986 613 670 Manual De Usuario

en

12 | 0 986 613 670 | Product description

3. Product description
3.1

Intended use

The snap ring assembly tool 0 986 613 670
(called assembly tool in the following) is used
to install the snap ring F 00V C23 002 on a com-
mon rail injector (CRI).
3.2

Scope of delivery

Denomination
Assembly tool
Mounting sleeve/ Mounting
mandrel
Original operating manual
Tab. 1: Scope of delivery
3.3

Device description

2
1
Fig. 1: Assembly tool
1 Assembly tool
2 Receiving sleeve 19 mm
3 Mounting lever
4 Securing lever
5 Mounting sleeve
5.1 Single annular groove on the mounting sleeve
5.2 Two annular grooves on the mounting sleeve
6 Mounting mandrel
|
1 689 989 325 2018-06-08
Order number
0 986 613 670
S P04 001 927
1 689 989 325
3
5.2
5
5.1
4
6
4.

Operation

WARNING - Risk of injury due to
parts flying off!
¶
Wear safety goggles.
¶
Make sure there is no one in the
immediate vicinity when installing
the snap ring.
4.1

Preparations

¶
Wipe the CRI with a clean cloth.
¶
Keep the CRI in the immediate vicinity for
installation of the snap ring.
4.2 Installing the snap ring on the
CRI
1. Place the mounting mandrel in the receiving
sleeve.
4511001-12_shd
Fig. 2: Placing the mounting mandrel in the receiving
sleeve
2. Place the snap ring on the mounting mandrel.
4511001-13_shd
Fig. 3: Snap ring on mounting mandrel
Robert Bosch GmbH