Maintenance And Care - Joycare JC-266 Manual De Instrucciones

Do not connect or disconnect the product from the network when your feet are immersed in water. Always make sure your hands are dry every time you
touch the function knob or when you insert or disconnect the plug. Never leave the appliance unguarded in the presence of children to avoid accidents
and injuries. For this reason it is advisable to place the appliance out of the reach of children. Always unplug when pouring water in the hydro massager.
Fill with water only, avoiding any solvents, oil, bath salts or other substances as they may interfere with the functioning of the product (by blocking the
outlet holes). The foot hydro massager has a DOUBLE INSULATION security system and so it does not require a grounding device. The repair of this type of
product should always be carried out by highly specialized personnel and the various components must always be original.
SPECIAL INSTRUCTIONS FOR THE USE OF THE FOOT HYDRO MASSAGER
If you have any doubts about your health always consult your doctor before using this appliance. Also consult your doctor before use in the following
cases: In case of pregnancy, if you suffer from diabetes and/or circulatory problems or if you have a pacemaker.
Do not use the product in the following cases. In case of sore or swollen feet or in the presence of rashes. If you are insensitive to heat. Legs with varicose
veins; in case of open wounds on legs or feet. If you have fungal infections, swelling, fractures or persistent pain. In case of doubts, consult your doctor
before using the appliance. The hydro massager should be an enjoyable and relaxing treatment. If you feel discomfort, pain or discomfort stop use and
consult your doctor.
IMPORTANT: Before connecting the product to the electrical socket, make sure that the knob is in the OFF position. Insert the plug in the electrical socket
and sit down comfortably. Never stand on the appliance.
CAUTION: NEVER INSERT THE PLUG IN THE ELECTRICAL SOCKET IF YOUR FEET ARE IN THE HYDRO MASSAGER
USE OF THE FOOT HYDRO MASSAGER
Place the product on a horizontal and stable surface so that it can not be knocked over. Make sure that the product is not connected to the network before
pouring the water into the basin. Fill the hydro massager's basin with warm water, do not exceed the maximum level (MAX) indicated on the product.
Insert the plug in the electrical socket and sit down comfortably and put your feet in the massage bowl and select the desired mode using the switch:
Off = the product is turned off
Vibration+Bubbles = Vibrating massage and bubble massage
Heat + infrared = Heating water and activation of the infrared lights.
Heat + bubble + vibration + infrared= Heating water, vibrating massage, bubble massage and
activation of the infrared lights.
Heating water
Tap water reaches a pleasant temperature for a relaxed footbath after ca. 10 minutes and this is kept constant during application. If you add cold water
to lower the temperature, please make sure not to exceed the maximum filling height.
Infrared light
The appliance is equipped infrared light incorporated in the footbath basin; these improve blood circulation. The infrared function must be enjoyable and
relaxing; if you feel discomfort or if the heat becomes too much for your skin, immediately stop the session and consult a doctor.
Massage roller
You can experience and enjoy the full benefits of the massage effect by moving your feet back and forth on the 4 massage rollers integrated into the
bottom of the footbath.
Interchangeable attachments
3 interchangeable attachments, to apply in the central side of the appliance, for a comfortable and local massage.
IMPORTANT:
Do not use the hydro massager for more than 10 minutes consecutively, to avoid possible overheating which, over time, reduces the appliance's useful life.
If treatments of more than 10 minutes is needed, turn the product off, let it cool down and then use again. CAUTION: Before connecting or disconnecting
the electric plug, make sure that the knob is in the OFF position.

MAINTENANCE AND CARE

Always bring the knob to the OFF position and unplug the product before cleaning. Completely empty the basin, ensuring that the water does not touch
the knob. Clean and dry the product with a slightly moist and soft cloth. Never use detergents. Never immerse the product in water or any other liquid.
5