Maintenance And Storage; Technical Specifications - Joycare JC-360 Manual Del Usuario

This appliance is not suitable for use by people (and children) of reduced physical, sensorial or mental capacity or who do not have the necessary
experience or knowledge, unless supervised or assisted in the use of the appliance by a person responsible for their safety.
Children must be supervised to ensure they do not play with the appliance.
If the power cord is damaged, it must be replaced by the manufacturer or the technical assistance service, or by a person who is similarly qualified to
prevent all risk.
The appliance has a function for heating the massaging heads. People not sensitive to heat must take all due care when using this function.
Consult your doctor before using the massaging appliance: in the event of serious illness or after having an operation on the upper body; if you have a
pacemaker, implants or other auxiliary devices; thrombosis; diabetes; in the event of pains of an unknown nature.
The appliance is intended only for the purpose described in these operating instructions. The manufacturer cannot accept liability for harm or damage
caused by inappropriate or non-conformant use.
The use of the product should have a pleasing and relaxing effect; if it causes pain or irritation, stop using the product immediately and consult your
doctor.
Do not use the product for more than 15 minutes at a time (risk of overheating) and let it cool down for at least 15 minutes before using it again.
Never use the product before going to sleep: the stimulating effect of the massage may cause a temporary state of insomnia.
Packaging materials (plastic bags, cardboard, polystyrene, etc.) must never be left within reach of children, since they are potentially dangerous and must
be disposed of in accordance with current directives and legislation.
DESCRIPTION OF THE DEVICE AND USE INSTRUCTIONS
This foot massager gives you a gentle and toning massage by stimulating the acupuncture
points, thereby improving blood circulation.
Place the device on the floor, insert the plug in the socket.
Press the power button and select the desired speed (high/medium/low).
By pressing once on the button device switches on, and by pressing the same button
again you will be able to select the speed.
Use the specific button to switch the heat function on or off
To switch off the device press the power button
1 - Massage heads
2 - Power button and button to select the three different speed levels (high-medium-low)
3 - Heat button to switch the heat function on or off
B
Warning: For safety reasons the device automatically switches off after 30 minutes use. This procedure does not replace the device's manual switching off
procedure. Always switch the device off when it is not being used and remove the plug from the socket.

MAINTENANCE AND STORAGE

Always detach the power cord before proceeding with cleaning the unit. Do not use any type of solvent to clean the appliance. Clean with a soft, slightly
dampened cloth, and never use detergents. Never immerse the appliance in water or any other liquid. Never use chemical detergents. Always store the
unit in a dry, well ventilated location, away from heat sources, direct sunlight, or sharp objects. Never coil the power cord around the appliance, and do not
use the power cord to hang up the unit.

TECHNICAL SPECIFICATIONS

Description: shiatsu foot massager
Power: 18W
Power supply: 220-240V~50Hz
Class II appliance
Do not use this appliance in the vicinity of a bathtub, shower, washbasin or other recipients containing water.
These devices conform to all applicable European directives.
DISPOSAL
At the end of its life cycle, the device (including its removable parts and accessories) must not be disposed of together with household waste, but
in compliance with European Directive 2002/96/EC. Since it must be handled separately from household waste, either bring it to a recycling and
waste disposal centre for electrical and electronic appliances or give it back to the retailer on purchasing a new equivalent unit. Any infringement
will be severely prosecuted.
Specifications and designs are based on the latest information available at the time of printing, and are subject to change without notice.
3