Dash Disassembly - Metra 95-7361S Instrucciones De Instalación

1. Remove (1) Phillips screw from the
right side of the panel below the
steering column then unclip and let
right side of panel hang. (Figure A)
2. Unclip and remove the cover
above the clock on top of panel
surrounding the radio. (Figure B)
3. Unclip and remove the panel
extending across the dash below
the a/c control and above the
glove box including the ash tray.
(Figure C)
4. Remove (2) Phillips screws then
unclip and remove the panel
surrounding the radio including the
A/C vents. (Figure D)
5. Remove (4) Phillips screws
securing the radio. Unplug and
remove radio.
6. Remove the (3) switches from the
factory radio and snap them into
the Metra radio housing.
Continue to kit assembly

Dash Disassembly

(Figure A)
(Figure C)
95-7361S
(Figure B)
(Figure D)
2