How To Measure Blood Pressure - Lanaform Blood Pressure Monitor Manual De Instrucciones

FIXING THE PRESSURE CUFF
1. Sit down on a seat with your feet on the ground and your arm (heart side) resting on a
table. Relax your arm as much as possible.
2. Put the cuff around your wrist "HEART SIDE" with the palm of your hand facing up. The
monitor's screen is now facing towards you (Figure 4).
3. Adjust the upper edge of the monitor: it should be between 0.5cm and 1cm below the
top of your wrist (Figure 5).
4. Pass the tape around your wrist so that it fits comfortably. Your wrist should not be
compressed.
PLEASE NOTE: It is natural for blood pressure to vary from one hand to the other, so always
take your blood pressure on the same arm to ensure the two readings are comparable.
5. Rest your arm on the storage box and make sure that the monitor is at the same level as
your heart (Figure 6).

HOW TO MEASURE BLOOD PRESSURE

1. Press the Stop/start button.
- All the display symbols appear for approximately
1 second. This is the initial LCD test.
Blood Pressure Monitor
18-88 18:88
AM
PM
88.8
mmHg
88.8
AVG
M
88
EN
11