Starting Up; Fitting The Distributor; Connecting An Oxygen Supply To The Distributor; Oxygen Supply - Weinmann WM 3880 Manual De Instrucciones

3. Starting up

3.1 Fitting the distributor

Bohrmuster
Drilling template
121 mm
3.2 Connecting an oxygen supply to the
distributor
O O O O
2 2 2 2
WEINMANN WEINMANN WEINMANN WEINMANN
1. Find a suitable location to attach the distributor.
2. Mark all six drill-holes at the attachment point.
3. Drill the holes using a Ø 3 mm drill bit.
121 mm
4. Screw on the distributor using the six screws enclosed.
The distributor must be fitted horizontally.
Example: connecting the distributor to an oxygen cylinder
1. Close the cylinder valve.
2. Connect the threaded connector of the pressure tube
to the free threaded connection on the distributor.
3. Connect the free connector of the pressure tube to the
corresponding connector on the oxygen supply.
Caution!
The surface for attachment must be sufficiently
sound to hold the distributor safely to DIN EN 1789
(ambulances).
Starting up 9