Using The 12 V Dc Output 8 A With Cigarette Lighter Adapter; Switch On Lighting - ULTIMATE SPEED UMAP 12000 B2 Instrucciones De Funcionamiento Y De Seguridad

: Charging is not possible if the portable jump starter
Note
1
with power bank is being charged itself.
z Using the 12 V DC output 8 A
with cigarette lighter adapter
Press the power switch
„
Connect the 12 V/8 A cigarette lighter adapter
„
on the 12 V DC output 8 A
starter with power bank
terminal device.
Note: You will not be able to use the portable jump star-
ter with power bank
Caution: Only use the 12 V/8 A cigarette lighter
adapter delivered with your product
a short circuit if you use third-party adapters.
z Switch on lighting
Light mode
When switching on the LED lights
„
power button
Press and hold the power button
„
conds to turn the LED lights
Flash mode
To switch on the LED light
„
mode, first press and hold the power switch
seconds. Then the LED light
Briefly press the power switch
„
LED light will switch to flashing mode.
Briefly press the power switch
„
7
.
3
1
und then connect it to your
1
if it is being charged.
for 3 seconds.
7
2
2
2
GB/IE/NI/CY/MT
Using the device
to your portable jump
14
. There is a risk of
2 , hold down the
7
again for 3 se-
off again.
in flashing or SOS
will be permanently lit.
7 once again and the
once again and the
7
14
7 for 3
25