Tabla de contenido
Publicidad
Technical Data
Magnetic Locator
Article number
Rod length
LCD display
Numerical indication
Operating temperature
Power supply
– Batteries (alkali-manganese)
Operating life time, approx.
– Batteries (alkali-manganese)
Weight according to
EPTA-Procedure 01/2003
Protection class, display
Protection class, locator rod
Noise Information
The A-weighted sound pressure level of the audio sig-
nal can exceed 85 dB(A).
Do not hold the measuring tool close to your
ear! Wear hearing protection!
Assembly
Inserting/Replacing the Battery
Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the batteries
can corrode and discharge themselves.
Alkali-manganese batteries are recommended for the
measuring tool.
Always replace both batteries. Use only batteries of
the same brand and with the same capacity.
When inserting batteries, pay attention to the correct
polarity according to the representation on the inside
of the battery compartment.
MT100/MT102: Replace the battery as soon as the
battery indicator 8 flashes.
MT200/MT202: Replace the battery as soon as the
battery indicator 17 displays (
2 610 A15 110 • 23.6.09
MT100
F 034 K82 1N0 F 034 K82 3N0
cm
72
0...99
– 18...+49 °C
6 x AA 1.5 V
h
100
kg
1.1
–
IP 67
(water-tight)
Operation
Initial Operation
Switching On and Off
MT100/MT 102: To switch on the measuring tool,
press the ON pushbutton 4; to switch off, press the
OFF pushbutton 10.
MT200/MT202: To switch on the measuring tool,
press the On/Off switch 14.
To switch the measuring tool off, press the "on/off"
button 14.
Adjusting the Volume
).
MT100/MT 102: To adjust the desired volume level,
turn the adjustment knob 2 in clockwise or anticlock-
wise direction.
MT200/MT202: To adjust the desired volume level,
press the buttons for volume control 19. The "+" but-
ton increases and the " – " button reduces the volume.
When switching off the measuring tool, the volume
level is retained in the memory.
MT102
F 034 K82 4N0 F 034 K82 5N0
F 034 K82 3N5
72
0...99
– 18...+49 °C
– 18...+49 °C
6 x AA 1.5 V
6 x AA 1.5 V
100
1.1
–
IP 67
(water-tight)
(water-tight)
Loud audio signals will sound under certain
conditions while operating the measuring
tool. Therefore, keep the measuring tool
away from your ear or other persons. The loud
audio signal can cause hearing damage.
Protect the measuring tool against moisture
and direct sun light.
Do not subject the measuring tool to
extreme temperatures or variations in tem-
perature. As an example, do not leave it in vehi-
cles for longer periods. In case of large variations
in temperature, allow the measuring tool to adjust
to the ambient temperature before putting it into
operation.
MT200
MT202
F 034 K82 5N1
70
0...99
– 99...+99
– 18...+49 °C
6 x AA 1.5 V
100
100
1.0
1.0
–
IP 67
IP 67
(water-tight)
English | 11
70
–
Publicidad
Tabla de contenido
