Polaroid OneStep 2 Manual De Instrucciones página 7

Box contents How to use
the OneStep
01 OneStep 2 Camera Charge the camera
02 USB Charging Cable Important The OneStep 2
03 User Manual will not be fully charged upon
04 Camera Neck Strap purchase — it should be fully
charged before first use. To
charge the camera, plug the
USB charging cable into the Mi-
cro-USB slot on the camera's
back panel, and the other end
of the cable into a charger,
such as a smartphone adapter
or your computer's USB slot.
The red flash charge LED will
turn off when the battery is
fully charged.
A full charge usually takes
about 2 hours through a wall
socket with a smartphone
adapter, or up to 4 hours
through a computer's USB
slot. A fully-charged OneStep 2
camera will have enough pow-
er to shoot 15-20 packs of
film, depending on usage.
Remember to turn your camera
off after every use to conserve
battery life.
1. Turn the designed to protect images
camera on/off from light as they develop — it
To turn the camera on, should not be removed. Take
slide the power switch into the the darkslide out from under
ON position (down). The flash the film shield and let the
charging LED on the back panel film shield roll back up. If the
will start blinking to charge darkslide has not ejected,
the flash, and the remaining remove the film pack and
film counter on the top of the re-insert it, making sure it is
camera will light up to indicate pushed all the way to the back
that the camera is switched on. of the camera.
To turn the camera off again,
4. Set the Flash
return the power switch to the
OFF position. & Lighten/Darken
Flash The camera flash will
2. Load the film trigger by default when you
Slide the film door latch shoot with the OneStep 2. To
to open the film door. Push shoot without the flash, press
the film cassette all the way and hold the flash override but-
in, with the film's darkslide ton on the back panel as you
facing up. press the shutter button.
Note Please check indi- Warning Shooting without
vidual film packaging for flash will reduce camera
development time, handling performance and picture
and storage details. quality in most lighting sit-
uations except brightly-lit,
3. Close film door sunny environments. We
When you close the film door, recommend always shoot-
the darkslide will eject from ing with flash.
the camera automatically, Lighten/Darken Use the light-
underneath the film shield. en/darken switch on the right
The plastic film shield is side of the lens barrel to adjust