Publicidad
Idiomas disponibles
Idiomas disponibles
The flash LED will blink green
button, the LEDs will return to
whilst charging between shots,
displaying the number of shots
and will be solid green when
remaining in your film pack.
ready to shoot.
2. Battery low:
Compatible Film
Enough charge for about
The OneStep 2 works with
1 pack of film.
all Polaroid Originals i-Type
The flash LED will blink orange
and 600 type film packs. We
whilst charging between shots,
recommend using i-Type film
and will be solid orange when
as it is optimized for use with
ready to shoot.
the OneStep 2.
3. Battery empty:
Power supply
No charge remaining.
The flash
will blink red,
Charge the OneStep 2 before
led
and the camera will cease to
use to ensure it has enough
operate until it is recharged.
power for the duration of your
A fully-charged OneStep 2
shoot (see →Charge the Cam-
camera will have enough pow-
era). The flash charge LED will
er to shoot 15-20 packs
be solid red whilst the camera is
of film, depending on usage.
plugged in and charging, and will
To check the camera's charge
turn off once the camera is fully
at any time, switch the camera
charged.
off, then switch it back on
Attach the camera neck strap
whilst holding down the
self-timer button. The 8 film
See page 8 for guide to attach-
counter LEDs on top of the
ing your neck strap.
camera will light up, indicating
how much battery remains.
Using a Tripod
For example: If 6 LEDs light
The OneStep 2 has a tripod
up, that means the camera has
socket in its base, which works
6/8 (75%) charge remaining.
with most standard tripods.
Once you release the self-timer
Simply screw your tripod
mount into the socket on the
8. Rollers will automatically re-
base of the OneStep 2.
turn to their correct position.
Note With most tripods,
the tripod mount will need
Troubleshooting
to be unscrewed before
you can load or exchange
& FAQ
film into the OneStep 2.
Cleaning the rollers
My OneStep 2 won't eject
Sometimes excess developer
my photo/darkslide
paste from photos may build
Make sure that your OneStep 2
up on the camera's rollers,
camera is charged: The cam-
affecting the camera's perfor-
era's flash charge LED will blink
mance and causing photos to
red if it doesn't have enough
show unwanted imperfections.
charge to operate. If this is
The OneStep 2 has a built-in
the case, you should recharge
roller cleaning mode to help
your camera before using the
with this issue. Just follow
camera again.
these steps:
Make sure you still have
1. Turn the camera off.
film in your camera: to check,
2. Open the film door.
slide the power switch off and
3. Hold the flash override button
on. The remaining film counter
and press the shutter button.
LEDs will indicate how many
4. The camera is now in roller
shots you have left in the film
cleaning mode.
pack. If the LEDs flash rapidly
5. Using a damp cloth or cotton
when the the camera turns on
swab, gently clean the rollers.
again, this means that there are
6. Press shutter button to
no shots left in the film pack, or
incrementally advance roller
that no film pack is inserted.
positions.
7. Once both rollers are clean on
all sides, close the film door.
Publicidad
