Allmatic BOOMY4 Manual Del Usuario página 57

9.3 ALERTS DURING OPERATION
DISPLAY DESCRIZIONE
RAD
It is displayed while learning transmitters.
don
It is displayed when a new transmitter is learned or at the end of a reset.
Fnd
It is displayed when a button is learned from an already learned transmitter.
CLR
Appears when a transmitter is deleted.
LOP
It is displayed during the learning of the strokes to indicate that the central is opening.
LCL
It is displayed during the learning of the strokes to indicate that the central is closing.
L--
It is displayed during the learning of the strokes in case of intervention of a security.
It is displayed when the control panel is waiting for a signal from a transmitter during the display of the
sEE
memory location (trS function).
It is displayed when the transmitter is not present in memory during the display of the memory location (trS
Not
function).
tout
It is displayed when the control panel exits due to inactivity from the display of the memory position.
power
It is displayed when the supply voltage is not enought.
9.4 LED ALERTS
LED COLOUR
PH1 RED
PH2 RED
PH3 RED
S1 RED
S2 RED
S3 RED
STOP RED
OPEN GREEN
CLOSE GREEN
SS GREEN
RADIO RED
POWER ON GREEN
6-1622396 - rev. 3 - 21/09/2021
DESCRIPTION
Led normally on in case of input connected to an NC contact. Signal the activation of the
photocell PH1.
Led normally on in case of input connected to an NC contact. Signal the activation of the
photocell PH2.
Safety signal, LED normally on.
Led normally on in case of input connected to an NC contact. Signal the activation of the
loop detector S1.
Led normally on in case of input connected to an NC contact. Signal the activation of the
loop detector S2.
Safety signal, LED normally on.
Safety signal, LED normally on.
Led normally off. It is switched on when it receives opening command.
Led normally off. It is switched on when it receives closing command.
Led normally off. It is switched on when it receives step-by-step command.
Led switched on in the presence of a radio transmission or interference.
Led normally on. Indicates the presence of input voltage to the control unit.
English - 21 / 36