Setting Up The Indoor Station; Searching For Transmitting Signals - Aeware in.watch El Manual Del Propietario

in.watch
Pull tab
Battery
compartment door

Setting up the indoor station

1. Open the battery compartment door.
2. Remove the pull-tab from the battery compartment.
3. Close the battery compartment door.
4. Insert the base stand into the bottom of the main unit.

Searching for transmitting signals

Press SEARCH button on the indoor station.
Signals coming from the remote transmitters will be searched for
3 minutes. The antenna icon
are being searched.
Base stand
When a transmitting signal has been found, the antenna icon will
stop flashing and the temperature will be displayed.
will flash while transmitting signals
11