Spa Status; Error Codes - Aeware in.watch El Manual Del Propietario

in.watch

Spa status

Spa temperature
The spa water temperature is
shown on the first line of
the display.
Spa alarms
An alarm will sound every
40 seconds when an error is
reported by the spa system.
Press MUTE button once to
stop the alarm. At this moment,
you will hear a "beep" sound.
Error codes on an MSPA-MP or M-Class spa system
On an MSPA-MP or M-Class spa system, the reported error
code(s) will be successively displayed following the spa water
temperature. Up to 5 error codes can be reported by the spa
system as listed in the table below.
Error code Description
HL High-Limit Sensor Error.
FLO Pressure Switch Error.
Pump is on but no water pressure detected.
FLC Pressure Switch Error.
Pump is off but water pressure detected.
OH Temperature Overheat.
PRR Temperature Regulation Probe Error.
Please refer to your user's manual for more details on specific
error codes for your spa model.
functional specifications
13