Steelcase Answer Boundary Screens Manual De Instrucciones página 5

®
Single-Connect Split Installation
(cont.)
7.
Install large wing bracket with twenty
(20) flat head wood screws (provided).
8.
Place Answer End-Of-Run (EOR)
vertical junction over Answer attachment
clips and slide up into position..
TIP: If desired, you can add a screw
(provided) to further secure the top of the
boundary screen to the Answer EOR
vertical junction.
9.
Place three (3) washers inside pocket of
Answer EOR vertical junction and install
four (4) 1/4-20 x 1/2" pan head
screws (as shown).
10.
Install two (2) decorative covers as
shown.
11.
Install two (2) glides as shown.
12.
Lift split boundary screen assembly up
and assemble rest of Answer panel per
assembly direction # 939504607.
NOTE: If this split boundary screen has a
return, go to page 6 for that installation
process.
11
ANSWER EOR
VERTICAL
JUNCTION
1/4-20 x 1/2" PAN HEAD
10
7
SCREW
WASHER
9
8
DECORATIVE
COVER
LARGE WING
BRACKET
ANSWER EOR VERTICAL JUNCTION
SEE TIP
Page 5 of 39
73085 Rev E