Technical Specifications - Warm Audio WA-2A Manual Del Usuario

TECHNICAL SPECIFICATIONS

line level, transformer
line level, transformer
maximum peak reduction
600 ohms impedance pin 2/tip=positive, pin
balanced input 3/ring=negative, pin 1/sleeve=ground
600 ohms impedance pin 2/tip=positive, pin 3/
balanced output ring=negative, pin 1/sleeve=ground
frequency response
+/- 1 DB, 15 HZ TO 20KHZ
+40 dB ±1dB
maximum gain
-40 dB ±3dB
input level +16 dB maximum
output level +10 dB nominal, +16 dB maximum
Less than 0. 1 % THD at ±10 dBm
distortion
noise dB
-74
attack time 10 milliseconds
release time 0.06 seconds for 50% release; 0.5 to 5 seconds
for complete release
tube compliment 2x 12AX7, 1x 12BH7, 1x 6P1 (compatible with
6aQ5, 6005, and 6N1N)
optical attenuator Kenetek T4B module (socketed) (compatible with T4A, T4B,
and T4C modules per standard wiring
configuration to standard octal header
1 15/230 volts (switchable), 50/60 Hz,
power
standard IEC 3 conductor cord
1x 250v, 1amp fast-blow type fuse
fuse compliment
19" Rackmount chassis, 2U. 19" x 7" x 3.5"
dimensions
weight 12 lbs
10