Safety Instructions - DesQ 20030 Informacion De Producto

Operation instruction

SAFETY INSTRUCTIONS

Read the operating manual carefully before starting up the shredder!
- Ensure that the voltage and frequency of the power supply correspond to the data on the rating
plate! Incorrect voltage may result in destruction of the unit!
- The socket must be easily accessible
- Do not open the housing lid! This can cause serious injury like electric shock! The inner parts
cannot be maintained.
Repairs are to be effected by qualified after-sales service staff only, or else the warranty of this
machine is no longer valid. The safety devices must not be removed or manipulated.
INSTALLATION
1. Place the shredder over the basket (Fig.A) so it firmly rests on the basket rim. (Fig. B)
2. When the shredder is positioned on the basket, put the plug into the outlet.
Do not alter the plug!
CAUTION !
1. a. This shredder is designed for short operation. If it runs for too long or overheats, the
shredder switches off automatically and must be cooling down for several minutes before it is
ready to resume operation. 2 minutes on, 40 minutes off.
b. Do not exceed the maximum cutting capacity!
2. The shredder is only suited for the shredding of paper and credit cards (not other materials like
labels, cardboard or plastics)!
3. Keep hands and fingers away from the feed opening. Serious injury may result. Be careful with
long hair and with neck-ties, bracelets, and other jewellery.
4. Do not expose the shredder to rain or humidity
5. Do not operate the machine unsupervised
6. Always turn off the shredder by unplugging the machine before moving or cleaning.
Cleaning only with a damp cloth!
7. Do not use in the vicinity of inflammable liquids or gasses.
Do not use in the vicinity of corrosive materials.
8. Be careful! Machine will start automatically when AUTO position is switched on!
9. Empty the basket and oil the shredder frequently for smooth, trouble free operation.
OPERATION
Remove all staples and paper clips! Max. capacity = 10 sheets at the same time (70 grams)!
1. Put the switch into " AUTO" position
2. The shredder switches on automatically when a sheet of paper is fed into feed aperture. It stops
once the sheet has passed through.
WHAT TO DO WHEN A PAPER JAM OCCURS
If the shredder fails because of a paper jam, hold the switch in position " REVERSE". Remove the
rejected paper and feed fewer sheets into the shredder.
NOTE : The shredder is only suited for the shredding of paper and credit cards (not
other materials like labels, cardboard or plastics)!