Important Safety Instructions - DesQ 20152 Manual De Instrucciones

IMPORTANT SAFETY INSTRUCTIONS

Read the operating manual carefully before utilizing the shredder.
- Ensure that the voltage and frequency of the power supply is equivalent to the shredder's
specifications. Incorrect voltage may result in destruction of the unit.
- Do not open the housing lid! This can cause serious injury like electric shock! Warranty on the
machine will become invalid once a non qualified person intervenes with the machine.
CAUTION !
1. The shredder will not operate without the supplied basket. The supplied basket has a built-in safety
feature which prevents the shredder from operating. Turn on the unit by the power button on the back
2. The shredder has sharp edges underside the shredding unit, watch out to avoid any injuries.
3. a. The shredder is designed for brief operation. If it runs for too long (more than +/- 10 minutes), the
shredder switches off automatically and must be allowed to cool down for at least 30 minutes before it
is ready to resume operation. The overheat led (7) indicates when the shredders needs to cool down.
b. Do not exceed the max. capacity! The overload led (6) will notify the user when it is overloaded.
4. The shredder is only suited for the shredding of paper, CD/DVD and credit cards, not other
materials like labels, cardboard or plastics!
5. Keep hands and fingers away from the feed opening. Serious injury may result. Be careful with long
hair and with neck-ties, bracelets, and other jewellery.
6. Do not expose the shredder to rain, water, humidity or heat
7. Do not operate the machine unsupervised
8 Always switch the product off and unplug the unit when not in use before cleaning or changing
accessories. Use a damp cloth for cleaning purposes!
9. Do not use in the vicinity of inflammable liquids or gasses. Do not use in the vicinity of corrosive
materials. Never use flammable synthetic oil or oils in an aerosol on the shredder
10. Be careful! The machine will start automatically when AUTO position (3) is switched on!
11. Empty the waste bin (2) when the binfull led (8) is lighted. Failing to do so will decrease the lifetime
of your shredder. The waste box for shredded CD/DVD/CC can be removed and emptied separately
for a better environment.
12. Never operate this product if the cable or plug is damaged.
OPERATION
Remove all staples and paper clips!
1. Put the switch into " AUTO" (3) position. The shredder automatically switches on when a sheet of
paper or CD/DVD/CC is fed into aperture.
2. The shredder cannot shred paper and CD/DVD/CC at the same time. The shredder will stop
automatically when the paper or CD/DVD/CC is shredded. CD/DVD/CC can only be shred by the
special CD/DVD/CC entry slot.
3. When shredding is completed, put switch into "off" (3) position.
Paper jam
If the shredder fails because of a paper jam, hold the switch in position " REVERSE" and toggle with
"FORWARD"(4). Remove the rejected paper and feed fewer sheets into the shredder.
Please don't put your fingers together with CD into the CD
slot (1) when you're shredding CD (see the following picture).
Specification
Shredding capacity:
Shredding type:
Shredding size:
Feed width:
Feed speed:
Max. continuous operation:
Dimensions:
Capacity of waste basket:
Noise level:
10 sheets of A4 paper(80g/M
cross cut
4 x 25mm (for paper); strip (for CD and credit card)
230mm (for paper), 130mm (for CD/DVD/Credit card)
Appr. 2m / minute
10 minutes
48,0 x 22,0 x 42,5 cm
18 litres
60 dbA
2
); 1 CD /Credit card
ENG