Publicidad
Idiomas disponibles
Idiomas disponibles
8
Slide tubes in freely... do not force.
They will not insert all of the way to
tape. The tape will be used later to
measure and center tubes.
7
1
Roughly center tubes before
mounting on vehicle. Mount on
vehicle using mounting pivots on
brackets installed earlier by inserting
pivots into brackets while holding
assembly tilted upward about 45°
and dropping into brackets.
9
1
1/8"
(12mm)
(3.2mm)
11
December 11, 2017
Top and Bottom Tubes,
Same on Opposite Side.
1/2"
1/8" Rivet
www.mopar.com
8
8
1
Mount Bed Extender and adjust each tube
so that the gap between the edge and the
tape is the same (approx. 3"-3.5").
10
6
4
12
9
5
3
7
K6862941
Publicidad
