Steelcase Bivi Tall Arch Markerboard Instrucciones De Montaje

®
FOAM TAPE
1.
Remove tape backer
and adhere foam tape
to the top bracket as
shown.
Remove tape backer
from the top bracket.
Place top bracket onto
upper extrusion (centered)
and press firmly into place.
2.
Remove tape backer
and adhere double stick
tape to bottom bracket.
Place bottom bracket
onto lower extrusion and
press firmly into place.
Insert foam tape inside
the bottom bracket as
shown.
3.
Align top of upper
arch infill with blade of
top bracket and push
upward.
4.
Swing bottom of
upper arch infill into
groove of lower bracket.
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2018 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
TOP
BRACKET
1
UPPER
EXTRUSION
TOP
BRACKET
LOWER
EXTRUSION
2
BOTTOM
BRACKET
3a
MARKERBOARD
Bivi® Tall Arch Markerboard
Side View
TOP
BRACKET
3b
MARKERBOARD
BOTTOM
BRACKET
Note: Apply new tape
to the inside bottom of
the bracket if the
markerboard is
removed and
re installed.
Foam Tape
(3) Places
4
Page 1 of 4
p/n 1280028001
137177 Rev B